Remoteye Network Card Option; Human Machine Interface (Hmi) Option - Toshiba 5000 Series Installation And Operation Manual

Industrial ups. 3-phase, 480vin - single phase, 120vout

Hide thumbs Also See for 5000 Series:

Table of Contents

10.3

RemotEye Network Card Option

The optional RemotEye network card for the Toshiba UPS permits network monitoring and control of the UPS. This card is

located on the upper right corner of the Transformer and Power Electronics Bay (Refer to Table 7.3). The card provides a

network, or LAN-based communication interface for the UPS. When installed, the UPS can be managed remotely using the

common SNMP, HTTP, BACnet, or Modbus

RS-232/RS-485 or web-based network protocols. The following diagram shows the flow of the Network Management

Station.

10.4

The HMI provides an upgraded interface which replaces the standard LCD Display. The HMI allows for the following

additional features:

1. Real-time updated graphs for monitoring of UPS parameters.

2. Capability to interface with the customer through different communication options and ports.

3. Expanded display to view all normally available LCD screen menus.

4. Pluggable interface modules with analog and digital contacts for additional inputs and outputs that can be

configured to meet additional customer requirements.

Please contact the factory for more information on the HMI option and the additional HMI modules that go with it.

NETWORK MANAGEMENT

STATION OR PC WITH

WEB BROWSER

NETWORK BACKBONE

FIGURE 10.1: NETWORK INTERFACE

5000 Series 3P1 Industrial UPS Installation and Operation Manual – 92973-001

TOSHIBA UPS

REMOTEYE NETWORK

CARD

Table of Contents