Unpacking; General Instructions - Toshiba 5000 Series Installation And Operation Manual

4

Unpacking

4.1

General Instructions

The UPS should be as close as possible to its final location. Allow enough space for forklift/crane operations to unpack the
UPS from the packing crate. Then remove the crate. Properly dispose of the crate.
Points to observe:
• Retain all small articles during unpacking and installation.
• Make sure that exterior paint is not scratched and that the UPS cabinet is not damaged before uncrating.
• DO NOT damage the UPS when using tools to remove packaging materials.
• If provided, DO NOT remove the protective plastic sheet cover until installation.
• Do not remove the protective fan covers over the fans until UPS start up. The fan covers should be removed
by factory authorized personnel. Packing materials should be disposed by the appropriate means.
• Immediately report any abnormalities to Toshiba Customer Support Center or an authorized representative.
• Locate and retain box labeled "Additional Parts Inside." It contains bus bars and hardware required to connect
the UPS and Bypass cabinets together.
5000 Series 3P1 Industrial UPS Installation and Operation Manual – 92973-001
7