Needle-Presser Module Removal - Baby Lock BLMY Service Manual

Main unit
5

Needle-presser module removal

1. Remove the screw 1.
2. Remove the 4 screws 2, and detach the presser plate A 1 and the presser
plate B 2.
3. Remove the needle-presser module.
4. Detach the shaft 3 from the needle-presser module.
6
Wire assy. removal
1. Remove retaining ring E3.
2. Remove retaining ring E4, and remove the wire assy. 1.
2 - 32
Needle bar, presser mechanism / Upper shaft mechanism
1
1 2
3
Retaining ring E4
1
Retaining ring E3
2