Operation Pcb Assembly Attachment - Baby Lock BLMY Service Manual

Main unit
9

Operation PCB assembly attachment

1. Connect the connector 1 on the operation PCB assembly 2.
*Key point
• Check that the lead wire of the connector 1 passes under the
left upper guide 3 of the operation PCB holder 4.
2. Attach the operation PCB assembly 2 to the operation PCB holder 4
with the 4 screws 1.
3. Connect the connector 5 and the FFC 6 on the operation PCB assembly
2.
*Key point
• Pull up the lock of the connector on the operation PCB
assembly 2 to release it, insert the FFC 6, and then push
down the lock to secure the cord.
1
3 - 36
Main parts
Taptite, Bind B
M3X8
Torque
0.39 – 0.79 N·m
1 3 6 4 2
1
5