Presser Foot Lifter Attachment - Baby Lock BLMY Service Manual

Modules
13

Presser foot lifter attachment

1. Attach the retaining ring E4 to the presser lift shaft 1.
2. Apply a small amount of MOLYKOTE EM30L to the presser lift shaft 1.
3. Insert the presser lift shaft 1 into the hole 2 in the thread releaser
assembly.
4. Attach the washer 4 to the presser lift shaft 1.
5. Lift up the presser bar clamp 3, and then attach the lifter assembly 5 and
the presser foot lifter 6 to the presser lift shaft 1.
6. Attach the retaining ring E4 to the presser lift shaft 1.
Apply MOLYKOTE EM30L to the operating
surface of the presser lifter shaft presser foot
lifter.
Apply MOLYKOTE EM30L to the operating
surface of the presser foot lifter presser bar
clamp
3 - 48
Needle-presser module
Retaining ring E4
Small amount
XC8385***
Small amount
XC8385***
Retaining ring E4
1
2 1
4
1
3 5
6 6 1