Supporting Plate Spring Attachment - Baby Lock BLMY Service Manual

Modules
14

Supporting plate spring attachment

1. Attach the spring
S12
arm B assy 2.
S12
15
Grease applications
1. Apply a small amount of EPNOC AP(N)0 to the vertical rod seat 1 on the
vertical lever, the lower shaft horizontal feed cam surface 2 and the
vertical feed cam surface 3.
2. Apply a small amount of MOLYKOTE EM30L to the lower shaft gear 4.
Apply EPNOC AP(N)0 to the vertical rod seat
Apply EPNOC AP(N)0 to the vertical feed cam surface
Apply EPNOC AP(N)0 to the horizontal feed cam
surface
Apply MOLYKOTE EM30L to all of the teeth around the
lower shaft gear
3 - 68
Feed module
to the feed supporting plate assy 1 and the feed
21.6
3.6
SPRING
XC2524***
Small amount
XC8387***
Small amount
XC8387***
Small amount
XC8387***
Small amount
XC8385***
1
2
S12
1
2
3 4