Side Feed Mechanism Assembly - Baby Lock BLMY Service Manual

Main unit
3

Side feed mechanism assembly

1. Attach the S pulse motor 1 using screws 1 (two).
2. Attach the side feed gear 2 to the side feed plate 3, and attach
3. Attach the side feed plate and side feed spacer 4 to the SPM holder, and
attach retaining ring E3.
*Key point
• Align the match marks on the side feed gear and the S pulse
motor gear.
4. Attach the rubber.
5. Attach the S stopper 5 using screw 2.
6. Attach the side feed arm assy. 6 and plate spring A 7 using screw 3.
7. Attach the side feed adjust plate 8, washer and plate spring B 9 using
screw 4.
1
2
3
4
S41
Electrical parts and motors
Screw, Bind
M3X4
0.79 – 1.18 N·m
Screw, Bind
M3X6
0.79 – 1.18 N·m
Screw, Bind
M3X5
0.79 – 1.18 N·m
20
SPRING, EXTENTION
3.6
.
S41
1
4
Torque
Torque
Torque
8
XA9508***
1
Retaining ring E3 2
S41
3 2
5
2
6 7 3
4 9
3 - 25