Modules Needle-Presser Module - Baby Lock BLSY Service Manual

Modules
1
Presser feed holder assembly removal
1. Press the black button on the rear of the presser feed holder assembly 1 to
remove the presser foot 2.
2. Loosen the screw 1, and then pull out the presser feed holder assembly
1.
2
Threader hook ASSY disassembly
1. Remove the thread guide assembly, threader hook assembly, link A
assembly, and link B.
3
Presser pulse motor holder assembly removal
1. Remove the 3 screws 12, and then remove the presser pulse motor
holder assembly 1.
4
Presser pulse motor holder ASSY disassembly
1. Remove the screw 1, and then remove the ATPF INIT PCB assembly 1.
2. Remove the 2 screws 2, and then remove the presser pulse motor 2.
3. Remove the presser pulse motor lead wire assembly 3 from the presser
pulse motor 2.
Needle-presser module
1
1 2
1 1
2
2 3
2 1 1
2 - 45