Feed Adjuster Assembly Attachment - Baby Lock BLMY Service Manual

Modules
6

Feed adjuster assembly attachment

1. Attach the feed adjuster assy. 1, polyester slider 2 and spring
bushing supporter assy. 3.
*Key point
• Attach spring S14
the side having the smaller spring diameter.
2. Attach the bushing supporter assy. 3 and feed adjuster assy. 2 to the feed
base 4 using the screws 1 (two).
Lubricate the feed adjuster assembly shaft with FBK
OIL RO 100
Apply EPNOC AP(N)0 to the entire operating part of
the feed adjuster feed regulator slide block.
1
S14
8.8
7
Stopper plate block assy. attachment
1. Attach the stopper plate block assy. 1 using the screw 1.
1
Feed module
to the feed adjuster assy. 2 starting with
Small amount
Screw, Bind
M4X6
1.18 – 1.57 N·m
9.9
5.5
Screw, Bind
M4X5
1.18 – 1.57 N·m
1
to the
S14
1 – 2 drops
XC8388***
XC8387***
3
Torque
SPRING
XC2531***
Torque
2 3
S14
4
1
1
1
3 - 63