Operation Pcb Holder Assembly Attachment - Baby Lock BLMY Service Manual

Main unit
8

Operation PCB holder assembly attachment

1. Attach the single light guide assembly 1 and the 2 spacers 2 to the
operation PCB holder 3 with the 2 screws 1.
*Key point
• Check that the lead wire of the single light guide assembly 1
passes upper the right groove 4 of the operation PCB holder
3.
2. Attach the operation PCB holder assembly 5 to the front cover with the 4
screws 2.
*Key point
• Hang the operation PCB holder assembly 5 over the 2 hooks
6 at the upper section of the front cover.
3. Attach the rubber key 7 to the operation PCB holder assembly 5.
1
2
Main parts
Taptite, Bind B
M3X8
0.39 – 0.79 N·m
1
2
Torque
2 1 4
3 2 1
6 5 6
2
5 7
3 - 35