Thread Take-Up Assy. Removal - Baby Lock BLMY Service Manual

Modules
25

Thread take-up assy. removal

1. Remove the screw 1, and detach the thread take-up lever assy 1.
NOTE •The screw 1 is reverse threaded.
2. Remove the 2 screws 2, and detach the needle bar crank rod assy 2.
26
Thread take-up counter weight removal
1. Remove the 2 screws 1, and thread take-up counter weight 1, thrust
washer, unit shaft 2 and thrust washer.
2. Remove the retaining ring E6 from the unit shaft 2.
27
Z zigzag lever and thread releaser assy. removal
1. Remove the retaining ring E3.
2. Detach the Z zigzag lever 1 and the thread releaser assy 2.
3. Remove the Z lever cup 3 from the Z zigzag lever 1.
Needle-presser module
1 1
2
1
1 Retaining ring E6
Retaining ring E3
1
3 2
2
2
2 - 43