Assembling The Thread Hook Assy - Baby Lock BLMY Service Manual

Modules
6

Assembling the thread hook assy

1. Attach the thread hook assembly 1 to the spacer 2.
2. Attach the washer 3, polyester slider 4 to pin A 5, and then attach the
retaining ring (E4).
7
Cutter holder assembly attachment
1. Attach the NT lower thread cutter 2 to the cutter holder assembly 1.
2. Engage the cutter holder assembly 1 with the thread cutter frame.
8
Presser plate assy. attachment
1. Attach the spring 1 and the presser plate assembly 2 to the thread cutter
frame with the screw 1.
1
Thread cutter module
Screw, Bind
M3X4
0.78 – 1.18 N·m
Retaining ring E4
Torque
2
1
5
4 3
2 1
2 1
1
3 - 79