Vertical Adjusting Screw Attachment - Baby Lock BLMY Service Manual

Modules
16

Vertical adjusting screw attachment

1. Attach the M5 nut 1 to the vertical adjusting screw 2.
*Key point
• Tighten the M5 nut 1 until the M5 nut 1 and the upper
surface of the vertical adjusting screw 2 meet.
2. Attach the vertical adjusting screw assembly 3 to the feed bar 4.
*Key point
• Tighten until the bottom of the M5 nut 1 touches the feed bar
4.
17
Feed bar attachment
1. Apply a small amount Molykote EM30L to the 2 shaft holes 1 in the feed
bar.
2. Attach the feed bar 2 and feed bar shaft A 3 to the feed arm A 4 using
the 2 screws 1.
*Key point
• Feed bar shaft A 3 is attached from the inside of the feed bar
2.
Apply MOLYKOTE EM30L to feed shaft holes in the
feed bar
Apply MOLYKOTE EM30L to feed bar shaft A
1
Feed module
Small amount
Small amount
Set Screw, Socket (CP)
M4X4
1.18 – 1.57 N·m
1
XC8385***
XC8385***
3
Torque
4
Upper surface meets.
2
4
3
1
2 3 4
1
3 - 69