Test Mode - Baby Lock BLMY Service Manual

Test Mode

Test Modes (When changing modes, turn the power off, and restart the test mode)
Mode Mode selection button
3 point needle With front cover
drop in place
Without front
cover
in place
Feed forward With front cover
and reverse in place
Without front
cover
in place
Feed dog With front cover
in place
position
Side feed line With front cover
in place
One-point With front cover
in place
pattern
Switches left base
Press twice, select
line / center base
3 line / right base line
and press .
with each stitch
*Pressing
SW5
SW5 stops the base
line from changing
6
Press , select
and press .
100 stitches forward on the left
base line
100 stitches reverse on the right
baseline
SW3
Each time you press
8
Press , select
changes position left
and press .
Press , select 6
and press twice.
17
Press , select
and press .
Z (zigzag) F (feed)
operations operations
0 mm
(none)
/
, the feed dog
None
/ center / right.
Horseshoe pattern sewing
One-point pattern sewing
Operating speed
Any speed may be
selected using the
speed control key
Switches low /
middle / high speed
with each push of
SW3.
Switches low / middle
/ high speed with each
push of the .
Switches low /
middle / high speed
with each push of
SW5.
Cannot be adjusted
Cannot be adjusted
Cannot be adjusted
4 - 5