Main unit
2
Rear cover attachment
1. Lower the presser lever 1.
2. Attach the rear cover, being careful to avoid the presser dial 3 being
caught in section 2.
3. Attach the rear cover, being careful to avoid the switch 5 being caught in
section 4, and then attach the hook 6 to the base plate.
4. Attach the rear cover, being careful to avoid the presser lever 1 being
caught in section 7.
5. Secure the rear cover to the arm bed with the screw 1.
1
3 - 32
Main parts
Screw, Bind
M4X8
Torque
0.78 – 1.18 N·m
2
3
5
4
6
1
7
1