Shaft Bushing Assembly Attachment - Baby Lock BLMY Service Manual

Modules
1

Shaft bushing assembly attachment

1. Using the 2 screws 1, attach the shaft bushing assembly 1 to the upper
unit holder.
1
2
Thread take-up lever link assembly
1. Apply a small amount of MOLYKOTE EM30L to the shaft hole in the
thread take-up lever link.
2. Attach the shaft 1, spring
upper unit holder, and attach retaining ring E4.
3. Install the screw 1 in the shaft 1.
Apply MOLYKOTE EM30L all the way around the
shaft hole in the thread take-up lever link.
1
S06
3 - 42
Needle-presser module
Screw, Pan (S/P washer)
M4X14DB
and thread take-up lever link 2 to the
S06
Set Screw, Socket (CP)
M3X5
20.7
5.2
Torque
1.18 – 1.57 N·m
small amount
XC8385
Torque
0.49 N·m
SPRING
XC2441***
1
1
1 2
Retaining ring E4
S06
1
1