Main unit
3
Thread take up spring attachment
1. Attach the
to the thread catching spring case 1.
S11
*Key point
• Insert the end 2 of
(second from bottom).
• Insert the bent side of
thread catching spring case 4 (two locations).
2. Attach the thread catching spring case 1 to the thread guard assembly 6
using the screw 1.
*Key point
• Align the protrusions 4 (two) on the bottom of the thread
catching spring case 1 with the oval hole 5 in the thread
guard assembly, and turn clockwise to the end of the hole to
attach.
1
S11
7.4
Thread tension mechanism
S11
into spring tensile position hole
3 between the protrusions on the
S11
Screw, Pan (S/P washer)
M3X18DA
0.78 – 1.18 N·m
15.6
THREAD TAKE UP SPRING
S11
2
4
Torque
XZ0145***
1
1
1
2
S11
3
6
1
5
1
3 - 17