Main unit
1
Leading guide removal
1. Remove the screw 1, and then remove the leading guide 1.
2
Thread cutter module removal
1. Remove the 2 screws 1, and then remove the free arm plate 1.
2. Remove the screws 2 and 3, and then remove the thread cutter module
2.
3
Feed module removal
1. Rotate the upper shaft, and bring the needle bar to its highest point
2. Remove the 2 screws 1, and detach the feed module 1 and the disk 2.
*Key point
• Raise the needle bar to the top position.
2 - 28
Rotary hook drive mechanism / Feed and bobbin
mechanism / Cutter assy. location diagram
1
1
1
2
2
Arm bed base
3
1
1
1
2