Engine Starting - Zetor Proxima 70 2012 Operator's Manual

ENGINE STARTING

1. Insert the key into the key switch ("0"
position).
2. Depress the clutch pedal.
3. Move the main shifting lever into
neutral position.
4. Move the hand clutch lever into
braking position (safety
switch will be actuated).
5. Turn the key from "0" position to "I"
position. The indication
glowing of thermo-start turns "ON".
6. Wait until the indication lamp is off.
(The time is dependent on coolant
temperature).
OPERATION
P11NG202a
In case that the indication lamp is
only flashing instead of lighting,
the glowing
(Chapter Signalling of glowing
system failures). Let repair the
indicated failure in a specialized
workshop.
7. Immediately
interlock
extinction (max. within 5 s) turn the
key from the position "I" into "II"
position (start).
lamp of
8. Release the key immediately after
starting the
automatically into "I" position. Do not
start longer than 15 sec.
P11NC203a
system failed
after indication lamp
engine, it returns
48