Login (Dt700 Series Only); Logout (Dt700 Series Only) - NEC Univerge DT310 User Manual

3.
B
ASIC

Login (DT700 Series Only)

When login mode is activated, the following procedure
is required.
Enter login code and press Set Soft key.
(The station number is used as the Login code.)
Login ID :
Password
:
Cancel
Enter the password and press OK Soft key.
:
Login ID
Password :
Cancel
If the login code is accepted, display changes to
normal idle status.
28 APR MON 8:45AM
101
List Dir
O
PERATION
2000
BK Set OK
2000
*****
BK Set OK
STA 101
ICM Prog

Logout (DT700 Series Only)

Press the preassigned Logout Feature Key on the
terminal.
This location is an example.
Note:
Note: Logout button is assigned by data setting at
the ECP (Enterprise Communication Plat-
form).
28 APR MON 8:45AM
101
List
"LOGOUT?" is displayed on the LCD of the termi-
nal.
28 APR MON 8:45AM
101
L-OUT
Press the Logout Feature Key on the terminal
again.
22
STA 101
Dir ICM Prog
LOGOUT ?
STA 101