Table of Contents
Advertisement
no.
thread breakage detection selection
Thread breakage
detecton nvald
number of invalid stitches at the start of
sewing of thread breakage detection
number of invalid stitches at the end of sewing
of thread breakage detection
re-sewing function after thread breakage
Ths s the functon that re-starts sewng of belt loops from the
poston where the machne has stopped by the detecton of thread
breakage.
language selection
Japanese
Spansh
Portuguese
Indonesan
Grease-up error clear
Clearng of number of sttches of grease-up s
performed.
"#-1-16. replenishing the desig-
→ Refer to
nated places with grease", p.138.
Grease-up error clear
Number of belt-loops to be sewn wth grease run-
out state s cleared.
→ Refer to
"#-1-16. replenishing the desig-
nated places with grease", p.138.
Item
Thread breakage
detecton vald
: Enable (Sewng s re-started by means of the
start swtch after resettng the sewng machne
on the thread breakage detecton error screen.)
: Dsable (The screen s returned to the data entry
screen by resettng the sewng machne on the
thread breakage error detecton screen.)
Englsh
Chnese
(tradtonal)
Italan
French
Turksh
Vetnamese
Russan
– 97 –
Input range/
selection range
―
0 to 15
(sttches)
0 to 15
(sttches)
―
―
Chnese
(simplified)
German
Korean
―
―
Initial
value
Vald
8
3
Enable
Englsh
―
―
Advertisement
Table of Contents
