Table of Contents
Advertisement
D
A
No.7
D
No.8
A
D
No.9
A
D
No.10
A
C
D
No.11
A
C
No.12
A
C
1. The range of belt-loop feeding length (the entire length of a belt-loop shown on the
operation panel) is from 58 mm to 130 mm. If the belt-loop feeding length exceeding the
aforementioned range is set, an error will occur.
2. In the case "distance B + distance D" exceeds 66 mm for pattern No. 4 or No. 5, "dis-
tance B + loosening amount/2" exceeds 66 mm for pattern Nos. 7 and 12, or "distance B
+ loosening amount" exceeds 66 mm for pattern Nos. 9 and 11, an error will occur.
3. The dimensions of the belt loop sewing shape displayed on the operation panel are
only for reference. The dimensions vary according to the belt-loop material. Be sure to
adjust the settings of belt loop dimensions so that your desired finished dimensions
are achieved.
* Numerical values shown in parentheses are set values. They are not the finished dimen-
sions.
A = 10 mm * (0 to 1)
B = 30 to 63 mm
B
D = 4 mm * (0 to 10)
E = 4 mm * (0 to 10)
E
F = 10 mm * (0 to 20)
F
Loosening amount = 0 to 20 mm
A = 10 mm * (0 to 1)
B = 49 to 109 mm
B
D = 4 mm * (0 to 10)
A = 10 mm * (0 to 1)
B = 30 to 60 mm
B
D = 4 mm * (0 to 10)
E = 6 mm * (-14 to 16)
E
Loosening amount = to 30 mm
A = 4 mm * (-10 to 19)
B = 4 to 109 mm
B
C = to 11 mm
D = 4 mm * (0 to 4)
A = 4 mm * (-10 to 19)
B = 30 to 0 mm
B
C = to 11 mm
D = 4 mm * (0 to 4)
E
E = 6 mm * (-14 to 16)
Loosening amount = to 30 mm
A = 4 mm * (-10 to 19)
D
B = 30 to 6 mm
B
C = to 11 mm
D = 4 mm * (0 to 4)
E
E = 2. mm * (-2. to 7.)
F
F = 10 mm * (0 to 20)
Loosening amount = 4 to 16 mm
Work clamp foot for linear
bartacking
– –
Work clamp foot for zigzag
bartacking
A = 10 mm * (0 to 1)
B = 30 to 63 mm
D = 3 mm * (0 to 10)
E = 3 mm * (0 to 10)
F = 10 mm * (0 to 20)
Loosening amount = 0 to 20 mm
A = 10 mm * (0 to 1)
B = 4 to 109 mm
D = 3 mm * (0 to 10)
A = 10 mm * (0 to 1)
B = 30 to 60 mm
D = 3 mm * (0 to 10)
E = 12 mm * (-12 to 22)
Loosening amount = to 30 mm
A = 6 mm * (-9 to 21)
B = 4 to 109 mm
C = to 11 mm
D = 3 mm * (0 to 4)
A = 6 mm * (-9 to 21)
B = 30 to 0 mm
C = to 11 mm
D = 3 mm * (0 to 4)
E = 12 mm * (-12 to 22)
Loosening amount = to 30 mm
A = 6 mm * (-9 to 21)
B = 30 to 6 mm
C = to 11 mm
D = 3 mm * (0 to 4)
E = 4 mm * (-1 to 9)
F = 10 mm * (0 to 20)
Loosening amount = 4 to 16 mm
Advertisement
Table of Contents
