1MRK 502 067-UEN B
•
•
•
4.
Delete reports in one of the following ways:
•
•
•
5.
Generate logs in one of the following ways:
•
•
Besides generating a report you can also generate a log file with the same information as
for the report. Open and see the details of the file in Notepad or MS Excel.
After a successful generation of the log, the system confirms with a message along with
the path of the log file.
6.8
Editing features in graph
You can do the following operations on the graph during calibration, commissioning and
monitoring:
•
Zoom in
•
Zoom out
•
Cancel zoom
•
Enable X-zooming
•
Enable Y-zooming
1.
Zoom in one of the following ways:
•
•
Commissioning manual
In the short cut menu, right click and select View report.
Click the View report button in the upper right corner of the auditing screen.
Double click a report record.
In the short cut menu, right click and select Delete report.
Click the Delete report button in the upper right corner of the auditing screen.
Select a record with the mouse cursor then press the Delete key on the keyboard.
In the short cut menu, right click and select Generate log.
Click the Generate log button.
Right click a graph and select Zoom in or Zoom out in the shortcut menu.
GUID-3F080E48-8B77-48A0-8283-89511E1AE50B V1 EN-US
Figure 17:
Zooming via the shortcut menu
Use the mouse to zoom in and select a part of the graph area.
Calibrating injection based sensitive rotor earth fault protection
IEC11000051-1-en.vsd
Section 6
GUID-B2784230-2355-4D4A-AAF0-34864C8D3190 v2
61