Typical / Recommended E-Stop Connection - ESAB m3 G2 System Manual

section 4 remote arc starter Box
4.4

typical / recommended e-stop connection

Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on
the unit nameplate.
To ensure proper operation, it is recommended that only genuine ESAB parts and products be used with this
equipment. The use of non-ESAB parts may void your warranty.
Replacement parts may be ordered from your ESAB Distributor.
Be sure to indicate any special shipping instructions when ordering replacement parts.
Refer to the Communications Guide located on the back page of this manual for a list of customer service phone
numbers.
note
Items listed in the assembly drawing Bill of Materials (included in the back
of this publication) that do not have a part number shown are not avail-
able from ESAB as a replaceable item and cannot be ordered. Descriptions
are shown for reference only. Please use local retail hardware outlets as a
source for these items.
44