Replacement Parts - ESAB m3 G2 System Manual

section 6 pt-36 plasma torch
6.19

replacement parts

general
Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on
the unit nameplate.
ordering
To ensure proper operation, it is recommended that only genuine ESAB parts and products be used with this
equipment. The use of non-ESAB parts may void your warranty.
Replacement parts may be ordered from your ESAB Distributor.
Be sure to indicate any special shipping instructions when ordering replacement parts.
Refer to the Communications Guide located on the back page of this manual for a list of customer service phone
numbers.
note
Bill of material items that have blank part numbers are provided for customer information only.
Hardware items should be available through local sources.
85