ESAB m3 G2 System Manual page 58

section 6
pt-36 torch technical specifications
type: Water cooled, Dual gas, mechanized plasmarc cutting torch
current rating: 1000 Amps @ 100% duty cycle
mounting Diameter: 2 inches (50.8 mm)
length of torch without leads: 16.7 inches (42 cm)
iec 60974-7 Voltage rating: 500 volts peak
striking Voltage (maximum value of hi-freQuencY voltage): 8000 VAC
minimum coolant flowrate: 1.3 GPM (5.9 l/min)
minimum coolant pressure at inlet: 175 psig (12.1 bars)
maximum coolant pressure at inlet: 200 psig (13.8 bars)
minimum acceptable rating of coolant recirculator:
16,830 BTU/HR (4.9 kW) at High Coolant Temperature - Ambient = 45
maximum safe gas pressures at inlets to torch: 125 psig (8.6 bars)
safety interlocks: This torch is intended for use with ESAB plasmarc cutting systems and controls employing a water flow
switch on the coolant return line from the torch. Removal of the nozzle retaining cup to service the torch breaks the
coolant return path.
pt-36 plasma torch
F (25 C) and 1.6 USGPM (6 L/min)
° °
58