Video Settings Menu - Sony STR-DN1020 Operating Instructions Manual

Video Settings menu

You can make settings for video.
x Resolution (Converting video signals)
Lets you convert the resolution of analog video input signals.
"Resolution"
parameter
Input from
• DIRECT COMPONENT VIDEO IN
jacks
VIDEO IN jacks
• AUTO(CVBS) COMPONENT VIDEO IN
jacks
(default setting)
VIDEO IN jacks
• 480/576i COMPONENT VIDEO IN
jacks
VIDEO IN jacks
• 480/576p COMPONENT VIDEO IN
jacks
VIDEO IN jacks
• 720p COMPONENT VIDEO IN
jacks
• 1080i
VIDEO IN jacks
• 1080p COMPONENT VIDEO IN
jacks
VIDEO IN jacks
z : Video signals are converted and output through the video converter.
a : The same type of signal as that of the input signal is output. Video signals are not converted.
– : Video signals are not output.
a)
The resolution is set automatically, depending on
the connected monitor.
b)
When the TV is connected to jacks other than the
HDMI jacks, 480i/576i signals are output.
c)
480p/576p signals are output even if 480i/576i is
set.
d)
Video signals without copyright protection are
output based on the settings menu. Video signals
with copyright protection are output as 480p/576p.
Output from
HDMI TV OUT
jack
a)
z
a)
z
a)
z
c)
z
c)
z
z
z
z
z
z
z
Notes
• Video signals are not output from the
COMPONENT VIDEO MONITOR OUT or
MONITOR VIDEO OUT jacks when the monitor,
etc., is connected to HDMI TV OUT jack.
• If you select a resolution that the connected TV
does not support in the "Resolution" parameter, the
images from the TV cannot be output correctly.
• Converted HDMI image output does not support
x.v.Color (x.v.Colour), Deep Color (Deep Colour)
and 3D image.
COMPONENT MONITOR VIDEO
VIDEO MONITOR OUT jack
OUT jacks
a
–
b)
z
b)
z
z
z
z
z
d)
z
d)
z
a
–
–
a
b)
z
b)
z
z
z
–
a
–
a
–
a
GB
97