Guide To On-Screen Display Operation - Sony STR-DN1020 Operating Instructions Manual

7
Press V/v repeatedly to select
"Do Not Use", then press
The confirmation display appears on the
TV screen.
8
Press V/v repeatedly to select
"OK", then press
"Connecting" appears on the TV screen.
"Complete!" appears after the network
settings are completed, then press
The display returns to the Network
Settings menu. (Depending on the
network environment, the network
settings may take some time.)
If "No Connection" is displayed, perform
the process referring to "Network
Settings menu" (page 99).
9
Perform the server settings.
To listen to audio content stored on the
server, you need to set up your server
(page 69).
To set the network settings
manually
See "To set the IP address manually"
(page 99) or "To set the Proxy server
manually" (page 99).
Tip
When checking the network settings, see "To check
the network information" (page 99).
GB
44
Guide to on-screen
.
display operation
You can display the menu of the receiver on
the TV screen and select the function you want
.
to use on the TV screen by pressing V/v/B/b
and
To display the menu of the receiver on the TV
.
screen, make sure that the receiver is in "GUI
MODE" following the steps in "To turn "GUI
MODE" on and off" (page 45).
RETURN/
EXIT O
1
2
on the remote control.
Using the menu
Switch the input of the TV so
that an image of the menu is
displayed.
Press MENU.
The menu is displayed on the TV screen.
GUI MODE
V/v/B/b,
TOOLS/
OPTIONS
MENU