Download  Print this page

Tuner Operations; Listening To Fm/am Radio - Sony STR-DN1020 Operating Instructions Manual

Multi channel av receiver.
Hide thumbs

Advertisement

Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation, be
sure you have connected the FM and AM
antennas (aerials) to the receiver (page 33).
Tip
The tuning scale for direct tuning is shown below.
Area
USA, Canada
Europe, Australia
* The AM tuning scale can be changed (page 56).
SHIFT
1
Press MENU.
The menu is displayed on the TV screen.
FM
AM
100 kHz
10 kHz*
50 kHz
9 kHz
Numeric
buttons
V/v/b,
TOOLS/
OPTIONS
MENU
2
Select "
FM" or "
FM
the menu, then press
The FM or AM menu list appears on the
TV screen.
Tuning to a station
automatically (Auto Tuning)
1
Select "Auto Tuning", then
press
or b.
2
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 55), or select the preset station you
want (page 56).
2
Press TOOLS/OPTIONS.
3
Select "FM Mode", then press
4
Select "MONO", then press
Tuning to a station directly
(Direct Tuning)
You can enter the frequency of a station
directly by using the numeric buttons.
1
Select "Direct Tuning", then
press
or b.
2
Press SHIFT, then press
numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 (b 0*)
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
* Press 0 for Europe and Australia models
only.
AM" from
AM
or b.
or b.
.
continued
GB
55

Advertisement

Table of Contents

   Related Manuals for Sony STR-DN1020

Comments to this Manuals

Symbols: 0
Latest comments: