O Tuning indicators
Lights up when the receiver tunes to a radio
station, or a satellite radio station.
RDS (Europe and Australia models only)
Tuned to a station with RDS services.
CAT (USA and Canada models only)
The category mode is selected during the
satellite radio operation.
Memory function, such as Preset Memory
(page 56), etc., is activated.
SIRIUS (USA and Canada models only)
The SiriusConnect Home tuner is connected and
"SR" is selected.
Lights up when the equalizer is activated.
Lights up when dynamic range compression is
activated (page 94).
Lights up when the A.P.M. (Automatic Phase
Matching) function is activated.
You can only set the A.P.M. (Automatic Phase
Matching) function in the DCAC (Digital
Cinema Auto Calibration) function (page 38).
S Dolby Pro Logic indicator
Lights up the respective indicator when the
receiver performs Dolby Pro Logic processing.
This matrix surround decoding technology can
enhance input signals.
These indicators may not light up depending on
the speaker pattern setting.
Lights up when the disc being played back
contains an LFE (Low Frequency Effect)
channel and the LFE channel signal is actually
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Dolby Pro Logic IIz
U Playback channel indicators
The letters (L, C, R, etc.) indicate the channels
being played back. Based on the speaker
settings, the box around the letter(s) vary to
show how the receiver downmixes the source
Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO
* When playing a Dolby Digital or DTS format disc,
make sure that you have completed the digital
connections and that INPUT MODE is not set to
"ANALOG" (page 85) or "A. DIRECT" is not
Front Left High
Front Right High
Surround (monaural or the
obtained by Pro Logic
Surround Back Left
Surround Back Right
Surround Back (the
surround back equipment
obtained by 6.1 channel