Settings For The Video (Video Settings Menu); Converting Video Signals - Sony STR-DN1000 Operating Instructions Manual

x Dec. Priority (Digital audio input
decoding priority)
Lets you specify the input mode for the digital
signal input to the HDMI IN jack.
• PCM
When signals from the HDMI IN jack are
selected, only PCM signals are output from
the connected player. To prevent interruption
when playback starts, set to "PCM". When
signals in any other format are received, set
this item to "AUTO".
• AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.
Note
Even when "Dec. Priority" is set to "PCM", the
sound may be interrupted at the very beginning of
the first track depending on the CD being played
back.
72
GB
Settings for the video
(Video Settings menu)
You can make settings for video.
Video Settings menu parameters
x Resolution

(Converting video signals)

Lets you convert the resolution of analog video
input signals.
• DIRECT
Lets you output analog video input signals
without conversion.
• AUTO
• 480/576i
• 480/576p
• 720p
• 1080i
For details, see "In the video input/output
conversion table classified by the menu
settings" (page 73).
Tip
You can also press RESOLUTION repeatedly to
convert analog video input signals.
Each time you press the button, the resolution of the
output signals will be changed.