Preparing For The "Bravia" Sync - Sony STR-DN1020 Operating Instructions Manual

Multi channel av receiver
Hide thumbs Also See for STR-DN1020:
Table of Contents

Advertisement

Preparing for the
"BRAVIA" Sync
The receiver is compatible with the "Control
for HDMI-Easy Setting" function.
• If your TV is compatible with the "Control
for HDMI-Easy Setting" function, you can
set the Control for HDMI function of the
receiver and playback equipment
automatically by setting the Control for
HDMI function on your TV (page 82).
• If your TV is not compatible with the
"Control for HDMI-Easy Setting" function,
set the Control for HDMI function of the
receiver, playback equipment and TV
individually (page 82).
If your TV is compatible with the
"Control for HDMI-Easy Setting"
function
The Control for HDMI function of the receiver
can be turned on simultaneously by turning on
the Control for HDMI function of the TV.
1
Connect the receiver, TV and playback
equipment via HDMI connection
(page 23, 24).
(The respective equipment must be
compatible with the Control for HDMI
function.)
2
Turn on the receiver, TV and playback
equipment.
3
Turn on the Control for HDMI function
of the TV.
The Control for HDMI function of the
receiver and all the connected equipment
are turned on simultaneously. When the
setup is completed, "COMPLETE" will
appear on the display panel.
For details on setup of the TV, refer to the
operating instructions of your TV.
GB
82
If your TV is not compatible with
the "Control for HDMI-Easy
Setting" function
1
Press MENU.
The menu is displayed on the TV screen.
2
Select "
Settings" from the menu,
or b.
then press
The Settings menu list appears on the TV
screen.
3
Select "HDMI", then press
4
Select "Ctrl for HDMI", then press
b.
5
Select "ON", then press
The Control for HDMI function is set to on.
6
Press GUI MODE to exit the GUI menu.
If the GUI menu is displayed, the Control
for HDMI function of the playback
equipment will not work properly.
7
Set the Control for HDMI function of the
connected equipment to on.
If the Control for HDMI function is already
set to on, you do not need to change the
setting.
For details on setting the TV and connected
equipment, refer to the operating
instructions of the respective equipment.
GUI MODE
V/v/b,
MENU
or b.
or
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents