Sony STR-DN1020 Operating Instructions Manual page 62

Multi channel av receiver
Hide thumbs Also See for STR-DN1020:
Table of Contents

Advertisement

5
Press SHIFT, then press the
numeric buttons to enter your
4-digit lock code.
"The channel has been locked." appears
and the Parental Lock is set.
To delete the numbers you have entered,
go back to step 2 by pressing RETURN/
EXIT O, and then repeat the procedure
above from step 2.
To change the lock code (Lock
Code)
1
Select a channel you want to change
the lock code using Category Mode
(page 60) or Direct Tuning (page 60).
2
Press TOOLS/OPTIONS.
The option menu appears.
3
Select "Lock Code", then press
"Enter your 4-digit lock code." appears.
4
Press SHIFT, then press the numeric
buttons to enter your 4-digit lock code.
"Enter a new lock code." appears.
5
Enter a new 4-digit lock code using the
numeric buttons.
"To confirm, enter your new lock code
again." appears.
6
Reenter the new lock code with the
numeric buttons.
"The lock code has been changed."
appears.
To listen to the locked channels
1
Select a locked channel you want to
listen to using Direct Tuning (page 60).
"Enter your 4-digit lock code." appears.
2
Press SHIFT, then press the numeric
buttons to enter your 4-digit lock code.
The channel is tuned in.
GB
62
To cancel the Parental Lock
1
Select a channel you want to unlock
using Direct Tuning (page 60).
2
Press TOOLS/OPTIONS.
The option menu appears.
3
Select "Parental Lock", then press
or b.
4
Select "OFF", then press
"Enter your 4-digit lock code." appears.
5
Press SHIFT, then press the numeric
buttons to enter your 4-digit lock code.
"The channel has been unlocked." appears
and the channel is unlocked.
Notes
• When you select a channel using Category Mode,
locked channels are skipped.
• When the receiver is reset to the default settings,
.
the lock code returns to the default (0000), but the
Parental Lock settings are not removed.
• You cannot preset locked channels. If you set the
Parental Lock for a preset channel, the preset
information for that channel returns to the default.
• You cannot set the Parental Lock for channel 0 and
channel 184.
• You can set only one lock code on the receiver.
You cannot set individual lock codes for each
channel.
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents