Download  Print this page

Playing Back Equipment With One-touch Operation (one-touch Play); Enjoying The Tv Sound From The Speakers; Connected To The Receiver; (system Audio Control) - Sony STR-DN1020 Operating Instructions Manual

Multi channel av receiver.
Hide thumbs

Advertisement

Notes
• Before you perform the "Control for HDMI-Easy
Setting" on your TV, be sure to turn on the TV and
other connected equipment including the receiver
first.
• If the playback equipment cannot function after
you have made the settings for "Control for HDMI-
Easy Setting", check the Control for HDMI setting
on your TV.
• If the connected equipment does not support the
"Control for HDMI-Easy Setting", but still
supports the Control for HDMI, then you need to
set the Control for HDMI function for the
connected equipment before you perform the
"Control for HDMI-Easy Setting" from the TV.
• If you have assigned the HDMI input to another
input using "HDMI Assign" in HDMI menu, the
One-Touch Play function is not available.
Playing back equipment
with one-touch operation
(One-Touch Play)
By a simple operation (one-touch), equipment
connected to the receiver with Bravia Sync
function start automatically. You can enjoy the
sound/image using connected equipment.
When you set "Pass Through" to "AUTO" or
"ON", sound and image can be output only
from the TV while the receiver remains in
standby mode.
When you start playback a connected
equipment, the receiver and TV operation are
simplified as follow:
Receiver and TV
Turns on (if in standby mode)
Switches to appropriate HDMI input
Notes
• Be sure that the System Audio Control function is
set to on using TV menu.
• Depending on the TV, the start of the content may
not appear.
• Depending on the settings, the receiver may not
turns on when "Pass Through" is set to "AUTO" or
"ON".
Tip
You can also select a connected equipment, such as
Blu-ray Disc/DVD player from the TV menu. The
receiver and TV will automatically switch to the
appropriate HDMI input.
Enjoying the TV sound
from the speakers

connected to the receiver

(System Audio Control)

You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
You can operate System Audio Control
function using the TV menu. For details, refer
to the operating instructions of the TV.
TV
Sets System
Audio Control
to on
Minimizes TV
volume
You can also use the System Audio Control
function as follows.
• If you turn on the receiver while the TV is
turned on, the System Audio Control
function will automatically activate to
output TV sound through the speakers
connected to the receiver. However, if you
turn off the receiver, the sound will output
from the TV speakers.
Receiver
• Turns on (if in
standby mode)
• Switches to
appropriate
HDMI input
Outputs TV
sound
continued
GB
83

Advertisement

Table of Contents

   Related Manuals for Sony STR-DN1020

Comments to this Manuals

Symbols: 0
Latest comments: