Switching The Display Screen - YOKOGAWA VigilantPlant mR20000 Operation Manual

Recording/Displaying Data

Switching the Display Screen

46
The screen switches each time the
switched in order. Screens that are set to "Skip" (See "Display Types" on the page 48)
are skipped. Below is a display example.
Display Example (1-channel digital + bar graph display)
Channel No.
Alarm status
Measured value
01 H -200.0mV
Bar graph
• Channel Auto Switching
On screens that show the measured values and computed values, the displayed
channel is automatically switched in ascending order. The switching interval can be
set to 1 s, 2 s, 3 s, 4 s, or 5 s.
• Switching the Displayed Channel Using Keys
If auto switching is not specified, the channel switches each time the
pressed in ascending order. All channels are displayed in order.
Display Example (Flag Display)
Display Example (Alarm Status Display)
Symbol indicating an alarm
Measurement channel
:123456 789
:ABCDEF GJ
Computation
channel
Display Example (Date/Time and Chart Speed Display)
The date format can be specified.
Date
Aug.31.2005 11:26:37 12000mm/h
Display Example (Status Display)
Alarm status
Remaining amount of chart paper is less than approx. 2 cm (/F1 option)
key is pressed. Screen 01 through 15 are
DISP
Unit
Alarm point mark
Flag (the number indicates the channel No.)
. . . . . . . . . . . . . . .
012 345678 901234
. . . . . . . . . . . .
P
ABCDEF GJKMNP
Channel on which an alarm is occurring
Channel on which an alarm is not occurring
Channel on which an alarm is not set
Tme
Scale
Scale
. . . . .
Chart speed
key is
CH UP
IM 04P02B01-02E