Table of Contents
Advertisement
Phoning
Note:
When you have activated ring alone but deactivated the personal call rout-
ing for a phone in parallel, an incoming call is not acoustically but only
visually signaled.
Activating/deactivating ring alone
Press the function key for
➔
The function is activated/deactivated. The LED on the function key is
switched on/off (Mitel 6865 SIP only).
Locking/Unlocking your phone
You need to leave your desk and want to ensure that no-one can alter your
phone's settings, look at your private data, or make calls from your phone.
You can lock your phone with a 2 to 10-digit PIN (for more information on
the PIN, see chapter "Changing the PIN", page 80).
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 88).
Activating the phone lock:
Press the function key for
➔
The phone is locked and can only be unlocked using your PIN.
locked
Deactivate the phone lock:
1. Press the function key for
2. Enter the PIN and confirm with the
3. Confirm the security prompt with the
Note:
Use the following function codes (see also Features Overview Mitel
415/430/470 user guide on the
phone lock for all phones within the one number user concept (see "One num-
ber user concept", page 8):
• Activating the phone lock: Enter the function code *33* <PIN> #
• Deactivate the phone lock: Enter the function code #33* <PIN> #
52
Ring Alone
Phone lock
is displayed.
on/off.
on/off.
Phone lock
on/off.
Enter
softkey.
Yes
softkey.
Mitel
DocFinder), to activate or deactivate the
Phone is
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/2.0 – R6.0 – 06.2018
Advertisement
Table of Contents
