Table of Contents
Advertisement
Phoning
Business calls:
1. Enter function code #36 for a business call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the internal or external phone number with the exchange access digit.
Pick up the handset.
➔
The phone number displayed is dialed.
Note:
When you hang up, dialing by name and your private phone book remain avail-
able for a whole minute so you can make another call.
Private calls:
1. Enter function code #46 for a private call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the external call number directly, without the exchange access digit.
5. Pick up the handset.
➔
The phone is now enabled; the external user is called.
Note:
The default PIN setting '0000' is not accepted (for more information on the PIN,
see chapter "Changing the PIN", page 80).
Automatic call waiting in case of internal user
You would like to talk to an internal user whose line is currently busy.
By using the function Automatic call waiting
you would like to talk to him. When you use the call waiting function, the
user receives a call waiting tone (duration and frequency of the tone
depend on system settings) and your phone number or name appear on
their display. The user may accept or refuse your call.
Requirements:
• Your system administrator must authorise you to use the function call
waiting in the MiVoice Office 400 communication system.
• The internal user must not have blocked the function call waiting on
their phone (see chapter "Activating protection against call types",
page 82 for configuration).
1)
from MiVoice Office 400 communication server software version R4.0 SP1
onwards
34
1)
, this user in informed that
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/2.0 – R6.0 – 06.2018
Advertisement
Table of Contents
