Table of Contents
Advertisement
Using your phone in hands-free mode
You want other people to join the conversation or to have your hands free
while making the call.
The hands-free mode function activates the loudspeaker and the micro-
phone. Make sure the hands-free microphone is not obstructed. The
sound quality is improved if you set the volume of your phone to a low set-
ting.
Automatic hands-free mode
you to answer a call without picking up the handset or pressing a key. The
following settings are available. This function Automatic hands-free can
only be activated/deactivated by your system administrator in the MiVoice
Office 400 communication system.
Menu
Off
Announcement only
On
Answering/ending a call in hands-free mode:
Answer: Press the loudspeaker or loudspeaker/headset key or line key.
End: Press the End key.
Hands-free during a call:
1. Press the loudspeaker or loudspeaker/headset key.
➔
2. Put the handset on-hook.
➔
To continue the call with the handset:
Pick up the handset.
➔
The loudspeaker and hands-free microphone are now deactivated.
Ending a call:
Put the handset on-hook.
1)
from MiVoice Office 400 communication server software version R4.0 SP1
onwards
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/2.0 – R6.0 – 06.2018
Description
Automatic hands-free is always deactivated.
Automatic hands-free is only activated when you are
receiving an announcement.
Automatic hands-free is always activated. Your phone
signals an incoming call with two short signal tones and
then switches to hands-free mode automatically.
Open listening is activated.
Hands-free is activated.
1)
: The function Automatic hands-free allows
Phoning
27
Advertisement
Table of Contents
