Advertisement
The following is a continuation of the DTCs associated with the stability assist feature.
DTC
C1440
C1516
C1517
C1730
C1805
C1960
C1963
C1991
C1996
C1998
C2769
C2770
C2777
C2778
U1900
U1901
U2023
NOTE: DTC C1730 Reference voltage out of range must be repaired before DTC C1279, C1280, C1281, C1282
and C1288.
2004 Explorer/Mountaineer New Model Technician Training
Description
Pressure transducer main/primary input signal faulted
Roll rate sensor signal fault
Roll rate sensor circuit failure
Reference voltage out of range (+5 V)
Mismatched PCM and/or stability assist module
Driver brake apply circuit failure
Stability control inhibit warning
Module calibration failure (checksum failure)
Active yaw and roll stability control disabled
Module calibration not complete
Longitudinal Acceleration sensor electrical failure
Longitudinal Acceleration sensor plausibility failure
Sensor cluster bus failure
Power supply failure
CAN network No. 1 communication BUS fault-receive error
CAN network No. 2 communication BUS fault-receive error
Fault received from external node
12-AUG-03
LESSON 2: CHASSIS
2-25
Hide quick links:
Advertisement
