Advertisement
Message Center Cluster Display
OIL PRESSURE, ###
BRAKE FLUID AD, #
BATTERY VOLTS, ##.#
PWM DIM STEP, ##
PWM DIM INPUT , ###
PRNDL, ##
PARK BRAKE, #
LIFTGATE AJAR, #
SEATBELT, #
RUN/START, #
RUN/ACC, #
CHECK ENGINE, ###
PORT A, B, E and J, ##
PORT H, IB, P, S and T, ##
PORT AD00-AD17
2004 Explorer/Mountaineer New Model Technician Training
Self-Test Mode (Cont.)
Displays the last analog/digital reading of the oil pressure
switch contact resistance, oil gauge will indicate present
level.
Displays the brake fluid level received from the ABS
module.
Displays present SBATT reading in 10th of volt.
Displays dimming step in decimal.
Displays present hexadecimal pulse width modulation
(PWM) dimming input.
Displays hexadecimal value of PRNDL inputs packed into
a single byte.
Displays input status of the park brake switch.
Displays input status of liftgate ajar input.
Displays input status of safety belt switch.
RUN/START sense circuit check.
RUN/ACC sense circuit check.
Displays 8-bit hexadecimal value of HSCAN service engine
soon (MIL) telltale command.
Displays 8-bit hexadecimal value for ports A, B, E and G
(base clusters) or J (message center clusters) readings (used
when requesting information from the hotline).
Displays 8-bit hexadecimal value for ports P, S, T, CAN,
AD0 and AD1 (base clusters) or H, IB, P, S and T
(message center clusters) in analog/digital readings (used
when requesting information from the hotline).
Displays 8-bit hexadecimal value for ports AD00-AD17 in
analog/digital readings (used when requesting information
from the hotline).
12-AUG-03
LESSON 4: ELECTRICAL
Description
4-21
Hide quick links:
Advertisement
