Do Not Disturb Mode; Enabling Or Disabling Dnd Mode From The Notifications Area - Avaya Vantage K100 User Manual

2. Tap Auto gain control (AGC) to optimize the audio output level for your handset,
headset, or speaker.
3. Tap Handset profile to change the audio profile of the wired handset.
4. Select the Set volume level to nominal when all calls end check box to automatically
adjust the audio output level when a call ends.
• From the Advanced area, do the following to modify the sound or tone for notifications and
alarms:
1. Tap Default notification sound or Default alarm sound.
2. Select the sound or tone to be played for notifications and alarms, and tap OK.
The sound you select is played if alarms and other notifications are not muted or
silenced.
• Use the toggle switch to enable or disable the following other sounds:
- Dial pad tones
- Screen locking sounds
- Touch sounds

Do Not Disturb mode

Enabling or disabling DND mode from the notifications area

About this task
Use this procedure to enable or disable the Do Not Disturb (DND) mode on the Avaya Vantage
device. You can use DND to limit sounds from the device when required. When DND is turned on,
you can still make or receive calls. The device displays the visual call or other alerts.
Procedure
1. To turn on the DND mode, swipe down to open the notification area, and tap Do not
disturb ( ).
You can also press and hold the Volume down button until the volume is down to zero and
"Alarms only" is on.
2. To customize the kind of interruptions to allow in DND mode, tap one of the following:
• Total silence: To completely mute your device so that it does not make any sounds or
vibrate. The device does not make sounds when you get a call or notification. This
option also mutes alarms and sounds from music, videos, games, or other media.
During a phone call, you can still hear the other person.
March 2019 Using the Avaya Vantage
Comments on this document? infodev@avaya.com
Do Not Disturb mode
™
Device
™
47