Configuring Wi-Fi From The Settings Menu - Avaya Vantage K100 User Manual

Device setup
3. Insert the wireless module into the slot.
4. Slide the module panel inward to close it.
You do not need a screw to fasten the module. The inside of the module panel has a small
protrusion that keeps the module in place.

Configuring Wi-Fi from the Settings menu

About this task
Use this procedure to configure a Wi-Fi network using the Settings menu on the device.
Procedure
1. Tap Settings.
2. Tap Network & Internet > Network mode.
3. Select Wi-Fi.
4. On the Network & Internet screen, tap Wi-Fi, and choose the required network.
5. For a network that requires authentication, enter the network credentials and select the
appropriate CA certificate option from the following:
• Use system certificates
• Do not validate
• List of trusted certificates installed on Wi-Fi certificate repository, if available
On a new device, no trusted certificates are installed in the repository, so you cannot
select this option.
6. Tap Connect.
If the credentials are authenticated successfully, the device connects to the Wi-Fi network.
March 2019 Using the Avaya Vantage
Comments on this document? infodev@avaya.com
™
Device 32