System Settings - HITEC X4 AC Pro Instruction Manual

System Settings

When powered on for the first time, your X4 AC Pro charger will load with default
values in the programmable user settings. Each channel has it's own system
setting allowing for a great of flexibility in controlling the various processes.
Use the INC or DEC buttons to scroll to the BATT/PROGRAM SYSTEM SETTING->
screen, press the START/ENTER button to enter the systems setting menu. The
screen displays the following information in sequence and the user can change
the value of the parameters on each screen.
Item
Safety Timer
ON 120min
Capacity Cut-Off
ON 5000mAh
Temp Cut-Off
ON
Temperature Unit
30
Selection
OFF / ON
1 ~ 720
Minutes
OFF / ON
100 ~ 50000
mAh
OFF/ ON
20C ~ 80C
50°C
68F ~ 176 F)
Celsius
Celsius
Fahrenheit
Description
When you start a charge process,
the internal safety timer auto-
matically starts running at the same
time. It is programmed to prevent
overcharging, if the battery proves
to be faulty or if the termination cir-
cuit cannot detect the full battery.
The value of the safety timer should
be generous enough to allow full
charging of the battery.
This sets the maximum charge
capacity that will be supplied to
the battery during charge. If the
delta peak voltage is not detected
for any reason or the safety timer
has not expired, this feature will
automatically stop the process at
the selected capacity value.
NICD/NiMH batteries internal
Chemical reaction will cause the
temperature of the battery to rise.
If the temperature limit is reached,
the process will be terminated.
Adjusts the units the temperature is
measured in.