Battery Connections - HITEC X4 AC Pro Instruction Manual

Battery Connections

TO AVOID SHORT CIRCUITS, ALWAYS CONNECT THE CHARGE LEADS
TO THE CHARGER FIRST, AND THEN TO THE BATTERY. REVERSE THE
SEQUENCE WHEN DISCONNECTING THE PACK.
Warning
DC 11-18V
Balance Socket
For safety reasons, the default setting for charging Lithium (LiPo, Lilon, LiFe
and LiHV)batteries is using a balancing connector to connect the battery
and charger in Charge, Fast Charge, Balance Charge and Storage modes. If
your battery does not have a balance adaptor without a balance wire con-
nector, you must disable this function in the system settings as follows.
BATT / PROGRAM
The balance wire attached to the battery must be connected to the charger
with the black wire aligned with the negative marking. Ensure correct polarity!
14
X1 CHARGER
BALANCE
SOCKET
SYTEM SETTINGS
Lithium Battery Connection With
Balance Adaptor
BALANCE ADAPTOR
6S
2S 3S 4S 5S
1
2
3
4
5
6
BALANCE
LEAD
BATTERY
BAL. Connection
ON
Battery Connection for
NiMH/NiCD and PB Batteries
NiMH