HITEC X4 AC Pro Instruction Manual page 11

Features (continued)
Re-Peak Mode of NiMH/NiCd Battery:
In re-peak charge mode, the charger can peak charge the battery once, twice,
or three times in a row automatically. This function is useful for ensuring a full
battery charge.
Delta-Peak Sensitivity for NiMH/NiCd:
This automatic charge termination program is based on the principle of
the Delta-peak voltage detection. When the battery's voltage exceeds the
threshold, the process will be terminated automatically.
Cyclic Charging/Discharging:
1 to 5 cyclic and continuous charge > discharge or discharge > charge sessions
are optimal for battery performance and balancing.
Automatic Charging Current Limit:
You can set the upper limit of the charging current when charging your NiMH
or NiCd battery. The 'AUTO' charging mode, however, is recommended when
charging NiMH batteries with low impedance and capacity.
LiPo Battery Meter:
The user can check the battery's total voltage, the highest voltage, the lowest
voltage and the voltage of each cell.
Battery Internal Resistance Meter:
The user can check the battery's total internal resistance and the internal
resistance of each cell.
Capacity Limit:
The charging capacity is always calculated as the charging current multiplied
by time. If the charging capacity exceeds the limit, the process will
automatically terminate according to the maximum value previously set.
Temperature Threshold*:
The battery's internal chemical reaction will cause the temperature of
the battery to rise. If the temperature limit is reached, the process will be
terminated.
* This function is available by connecting an optional temperature probe which
is available as a separate purchase.
11