Introduction - HITEC X4 AC Pro Instruction Manual

Introduction

Congratulations on your choice of the X4 AC Pro charger from Hitec RCD, USA.
The X4 AC Pro is a high-performance, microprocessor-controlled charger/
discharger with battery management capabilities that are suitable for use with
most popular battery types. The X4 AC Pro also features integrated balancing
for six-cell Lithium-Polymer (LiPo), Lithium-Ferrite (LiFe) and Lithium-Ion (Li-
Ion), as well as the latest high voltage Lithium-Polymer (LiHV) batteries.
Please read this entire operating manual before using the X4 AC Pro Charger.
If you are unsure of its proper operation after reading the manual, please seek
advice from an experienced hobbyist or someone familiar with proper battery
charging procedures.
THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE
DANGEROUS. FAILURE TO FOLLOW THESE EXPLICIT WARNINGS CAN
Warning
RESULT IN PROPERTY DAMAGE AND/OR LOSS OF LIFE.
A
NEVER LEAVE YOUR CHARGER UNATTENDED WHILE IN OPERATION.
A
NEVER CHARGE ON OR AROUND COMBUSTIBLE MATERIALS.
A
NEVER CHARGE A DAMAGED BATTERY PACK.
A
LOW COST, NO-NAME BATTERY PACKS POSE THE MOST DANGER. WE
RECOMMEND YOU ONLY USE BATTERY PACKS THAT ARE SOLD AND
WARRANTED BY A REPUTABLE COMPANY.
A
IT IS HIGHLY RECOMMENDED THAT YOU UTILIZE A SAFETY DEVICE SUCH
AS A STEEL CASE OR LIPO SACK™ WHILE CHARGING LITHIUM CHEMISTRY
BATTERIES.
A
IT IS HIGHLY RECOMMENDED THAT YOU KEEP AN OPERABLE "CLASS A"
FIRE EXTINGUISHER IN THE CHARGING AREA.
FAILURE TO FOLLOW THESE WARNINGS CAN BE CONSIDERED
NEGLIGENCE BY THE OPERATOR AND MAY NEGATE ANY CLAIMS FOR
DAMAGES INCURRED.
Hitec RCD USA will not be held responsible for any damages or injuries that
may occur by persons who fail to follow these warnings or who fail to properly
follow the instructions in this manual.
3