Table of Contents
Advertisement
GLOBAL VLAN CONFIGURATION
Configuration
VLANs
This page allows for controlling VLAN configuration on the switch.
The page is divided into a global section and a per-port configuration section.
GLOBAL VLAN CONFIGURATION
Allowed Access VLANs
This field shows the allowed Access VLANs, i.e. it only affects ports configured as Access ports.
Ports in other modes are members of the VLANs specified in the Allowed VLANs field. By
default, only VLAN 1 is enabled. More VLANs may be created by using a list syntax where the
individual elements are separated by commas. Ranges are specified with a dash separating the
lower and upper bound.
The following example will create VLANs 1, 10, 11, 12, 13, 200, and 300: 1,10-13,200,300.
Spaces are allowed in between the delimiters.
Ethertype for Custom S-ports
This field specifies the ethertype/TPID (specified in hexadecimal) used for Custom S-ports. The
setting is in force for all ports whose Port Type is set to S-Custom-Port.
PAGE 166
OPTICAL SYSTEMS DESIGN
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801
Advertisement
Table of Contents
