Table of Contents
Advertisement
This page provides IP Source Guard related configuration.
Mode of IP Source Guard Configuration
Enable the Global IP Source Guard or disable the Global IP Source Guard. All configured ACEs
will be lost when the mode is enabled.
Port Mode Configuration
Specify IP Source Guard is enabled on which ports. Only when both Global Mode and Port Mode
on a given port are enabled, IP Source Guard is enabled on this given port.
Max Dynamic Clients
Specify the maximum number of dynamic clients that can be learned on given port. This value can
be 0, 1, 2 or unlimited. If the port mode is enabled and the value of max dynamic client is equal to
0, it means only allow the IP packets forwarding that are matched in static entries on the specific
port.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
PAGE 100
OPTICAL SYSTEMS DESIGN
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801
Advertisement
Table of Contents
