Table of Contents
Advertisement
QOS CONTROL LIST STATUS
Monitor
Ports
This page shows the QCL status by different QCL users. Each row describes the QCE
that is defined. It is a conflict if a specific QCE is not applied to the hardware due to
hardware limitations. The maximum number of QCEs is 256 on each switch.
User
Indicates the QCL user.
QCE
Indicates the QCE id.
Port
Indicates the list of ports configured with the QCE.
Frame Type
Indicates the type of frame. Possible values are:
Any: Match any frame type.
Ethernet: Match EtherType frames.
LLC: Match (LLC) frames.
SNAP: Match (SNAP) frames.
IPv4: Match IPv4 frames.
IPv6: Match IPv6 frames.
Action
Indicates the classification action taken on ingress frame if parameters configured are matched
with the frame's content.
Possible actions are:
CoS: Classify Class of Service.
DPL: Classify Drop Precedence Level.
DSCP: Classify DSCP value.
PCP: Classify PCP value.
DEI: Classify DEI value.
Policy: Classify ACL Policy number.
Conflict
Displays Conflict status of QCL entries. As H/W resources are shared by multiple applications. It
may happen that resources required to add a QCE may not be available, in that case it shows
conflict status as 'Yes', otherwise it is always 'No'. Please note that conflict can be resolved by
releasing the H/W resources required to add QCL entry on pressing 'Resolve Conflict' button.
PAGE 240
OPTICAL SYSTEMS DESIGN
QCL Status
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801
Advertisement
Table of Contents
