Ptp Expernal Clock Mode; Ptp External Clock Configuration - Optical Systems Design OSD2790SFP User Manual

PTP EXPERNAL CLOCK MODE

Configuration PTP
This page allows the user to configure and inspect the current PTP clock settings.

PTP EXTERNAL CLOCK CONFIGURATION

One_PPS_Mode
This Selection box will allow you to select the One_pps_mode configuration.
The following values are possible:
1. Output: Enable the 1 pps clock output
2. Input: Enable the 1 pps clock input
3. Disable: Disable the 1 pps clock in/out-put
External Enable
This Selection box will allow you to configure the External Clock output.
The following values are possible:
1. True: Enable the external clock output
2. False: Disable the external clock output
Adjust Method
This Selection box will allow you to configure the Frequency adjustment configuration.
1. LTC frequency: Select Local Time Counter (LTC) frequency control
2. SyncE-DPLL: Select SyncE DPLL frequency control, if allowed by SyncE
3. Oscillator: Select an oscillator independent of SyncE for frequency control, if supported by the
HW
4. LTC phase: Select Local Time Counter (LTC) phase control (assumes that the frequency is
locked by means of SyncE)
PAGE 214
OPTICAL SYSTEMS DESIGN
OSD2790SFP OPERATOR MANUAL
DOC ID: 10118801